Products• Jet Fuel
• JP54 Russian Aviation Kerosene
• Fuel Oil
• Base Oil
• Used Oil
• Furnace Oil
Chemicals• White Spirit
JET A-1 FUELJet fuel, aviation turbine fuel (ATF), or avtur, is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification.
DIESEL GAS OILIt is a type of fuel oil distilled from petroleum and heavier than paraffin oil. It is cheaper than normal road diesel as it is a rebated fuel.
JP54 AVIATION KEROSENE OILKerosene is an oil distillate commonly used as a fuel or solvent. It is a thin, clear liquid consisting of a mixture of hydrocarbons that boil between 302°F and 527°F (150°C and 275°C). While kerosene can be extracted from coal, oil shale, and wood, it is primarily derived from refined petroleum
FUEL OILFuel oil (also known as heavy oil, marine fuel or furnace oil) is a fraction obtained From petroleum distillation, either as a distillate or a residue.
BITUMEN AND ASPHALTBitumen and asphalt are terms that are often used interchangeably; however, bitumen is the black oil product while asphalt is a combination of bitumen and aggregate rock and sand. It is a very heavy, viscous material, is highly resistant to water and to environmental factors and is usually transported and stored at high temperatures (150 C / 300 F). Bitumen is predominantly produced from refining crude but also occurs naturally.
BASE OILBASE Oil is the name given to lubrication grade oils initially produced from refining crude oil (mineral base oil) or through chemical synthesis(synthetic base oil ).Base oil is typically defined as oil with a boiling point range between 550 and 1050 F, consisting of hydrocarbons with 18 to 40 carbon atoms.Base oils are used to for manufacture products including lubricating greases, motor oil and metal processing fluids.
BASE OIL SN300Base Oil SN 300 is called as a light grade base oil and is a Grade I base oils. The major use is in lubricant and in lubricant additives production.
• Mould Oil
• Gear Oils
• Transformer and Hydraulic Oils
BASE OIL SN500Base Oil SN 500 is defined as a light grade base oil.It is mostly used in lubricant production.
• Engine oils
• Transmission fluids
• Gear oils
• Metal working fluids